image

After Care


Please do not use this surface for 48 hrs (at room temperature). Although the refinished surface can be put back into full use after this time, the surface will actually require up to 90 days to completely cure. Please observe the following:


1. During the refinishing process, special masking tape was used, which will protect other surfaces during the drying and curing, but which can be easily removed by you. Remove this masking after the initial downtime, but within 1 week after the designated downtime. Care should be taken when removing the masking from wallpaper, or painted surfaces, so remove the making slowly and carefully.


2. Clean the finish regularly with soap and sponge (this is called surface conditioning).PLEASE NOTE: All newly refinished surfaces will have some surface dust which will have settled into the new surface. Do not be alarmed; because the surface is still within its long term cure period, normal use and regular cleaning will remove all minor surface dust marks.


3. When removing the masking from around the drain area, be careful not to break the seal around the drain shoe. Any glaze which is left on the surface of the drain shoe can be carefully removed with a razor blade or knife,


4. DO NOT lay soap, bottles, or any other objects on the finished surface.

5. Be sure that your faucet taps are dry and not dripping after using the fixture, and be sure to towel dry the refinished surface after each use.


LONG TERM CARE


1. DO NOT use any abrasive cleaners on or near the refinished surface. Your new, glossy finishes easily cleaned with any mild liquid cleaner, and should be cleaned after each use. In general, any cleaner approved for use on acrylic surfaces is okay to use.


2. DO NOT use any abrasive scrubbing pads, such as Scotchbrite™ or any similar scrubbing pads, as this will scratch the new surface.


3. DO NOT drop sharp or heavy objects on the finish, which may cause it to chip. Contact your Professional Refinisher immediately for repairs if this should occur. Failure to contact your refinisher in a timely manner can result in further damage and will void the guarantee.


4. Faucets must be properly maintained by the owner and user, to protect the new surface. Leaky faucets will erode the new finish, causing it to crack and wear out prematurely, and voiding the guarantee.


5. Destruction of the finish may occur though improper use of acid bearing compounds, such as drain openers or tile grout clears. All chemicals must be kept away from the finish. These chemicals include, but are not limited to, cosmetics, hair dyes, and perfumes, which may stain or otherwise mar the finish. Introduction of any of these chemicals onto the finish would be considered neglect and void the guarantee.


6. DO NOT use a rubber bath math most mats will produce a reaction to the new surface when subjected to hot water. Your Professional Refinisher carries a full line of Sure-Step™ Permanent Safety Mats, which will give years of trouble free service. These mats are guaranteed, ask your Professional Refinisher for details.


REMEMBER, if you treat your new surface with respect, clean it regularly, and follow the above guidelines, your fixture will stay shiny and bright, and give you many years of trouble-free service

Our Mission

Our mission is so simple. People need a new and improve bathroom appliances. So we help make it happen. In fact, we perform tub refinishing and counter top resurfacing at a whole other level than other businesses. That’s because there is a science behind what we do. We provide the latest techniques with some good ol fashion elbow grease to renew our client's bathtubs, sinks, and tiles. We want you to have the bathroom you deserve! Most of our jobs take just a few hours to complete. you can set up an appointment with us from Monday through Sunday!

 

Fill out the form below and we will contact you within 24 hours